Sherman TIG Welding Torch X35 T-17 4m 35-50mm

SHERMAN WELDING TORCH X35 – T-17/4m

X35 series welding torches are designed for manual TIG welding with a non-consumable tungsten electrode in an inert gas (argon) shield. This method can be used to weld both low-carbon and quality steels, as well as non-ferrous metals.

The end of the handle is terminated with a current-gas plug with a gas hose. The holder is designed to operate at a rated voltage of 113V peak value in accordance with PN-EN 60974-7.

TECHNICAL DATA:

• Length [m]: 4
• Catalog number: 7812642
• Current carrying capacity in the duty cycle X 35(A) - AC: 125
• Current carrying capacity in the duty cycle X 35(A) - DC: 140
• Shielding gas flow rate [l/min]: 10 - 20
• Type of cooling: shielding gas
• Connection in the handle: ŁW/ŁP 35-50

Our TIG welding torch is sold without a control plug. This is due to the variety of control sockets used in different welding machine models available on the market. To properly connect the torch to your welding machine, please follow these steps:

1. Identify the PINs on your welding machine - Check which PINs in your welding machine's socket correspond to the control of the welding torch. This information can be found in the welding machine's user manual or by contacting the manufacturer of the device.

2. Obtain the appropriate plug - Purchase the appropriate plug that fits your welding machine's socket. Ensure that the plug complies with the standards and specifications of your device.

3. Solder the wires - Our torch has two wires: positive (+) and negative (-). Solder both wires to the corresponding PINs in the plug, according to the information identified earlier.