⚡ TECNO MIG 211 S‑PULSE ALU SYNERGIC Inverter Welder

✅ Product Description

The TECNO MIG 211 S‑PULSE ALU SYNERGIC is a modern synergic inverter welding machine designed for MIG/MAG, MIG PULSE, TIG LIFT, FLUX and MMA methods. It is engineered for a broad range of applications – from maintenance tasks to advanced vehicle body repairs.

It allows welding of carbon steels, low‑alloy steels and aluminium – both under inert/active/mixed gases and optionally without gas using self‑shielded wire with reverse polarity.

The unit features a clear LED control panel and offers five welding modes:

• LIFT TIG
• MMA
• MANUAL MIG
• SYNERGIC MIG
• PULSE MIG

The PULSE MIG mode is specifically designed for aluminium using 1.0 mm wire in single‑pulse operation, achieving higher weld quality in any position and minimising spatter.

There is a 2T/4T trigger mode selection for the MIG torch handle, and inductance adjustment is available in MANUAL MIG and SYNERGIC MIG modes. In MMA mode the unit offers advanced parameter control: ARC FORCE, HOT START and VRD (Voltage Reduction Device) to lower open‑circuit voltage for safer operation in humid conditions.

✅ Key Features

• 5 welding modes: MIG/MAG, MIG PULSE, TIG LIFT, FLUX, MMA
• Welding of aluminium, carbon & low‑alloy steels, and self‑shielded wire
• MIG torch trigger modes: 2T / 4T
• ARC FORCE, HOT START, VRD controls
• Inductance adjustment (MANUAL MIG / SYNERGIC MIG)

✅ Physical Parameters

• Fan‑cooling system
• Overload protection
• Weight: 9.5 kg (unit) / 13.5 kg (kit)
• Dimensions: 460 × 205 × 350 mm
• Package dimensions: 550 × 230 × 365 mm

✅ Power Supply Parameters

• Rated input voltage: 230 V; 50 Hz (single phase)
• Power: 6.3 kW
• Supply protection: C20A
• No‑load voltage: 62 V

✅ Technical Parameters

• Max weld current: 200 A
• Current at 100% duty cycle: 155 A (MIG/TIG) / 139 A (MMA)
• Current at 60% duty cycle: 200 A (MIG/TIG) / 180 A (MMA)
• Welding current range: 30–200 A (MIG) / 15–200 A (TIG) / 20–180 A (MMA)
• Aluminium wire diameter: 0.9–1.2 mm (MAN/SYN) / 1.0 mm (PULSE)
• Self‑shielded wire diameter: 0.6–1.0 mm
• Steel wire diameter: 0.6–1.0 mm
• Stainless steel wire diameter: 0.8–1.0 mm
• Electrode diameter: 1.6–4.0 mm
• Wire spool size: D100 (0.45‑1 kg) / D200 (2‑5 kg)
• Protection class: IP21S

✅ Equipment

• MIG torch 15 – length: 3 m
• Ground cable – length: 2 m
• Electrode cable – length: 2 m
• Wire feeder roll: 0.8–1.0 mm (for steel)