⚡ PRAKTIK MIG 201 SYNERGIC LED Inverter Welder

✅ Product Description

The PRAKTIK MIG 201 SYNERGIC LED is a modern synergic inverter semi‑automatic welding machine allowing welding by MIG/MAG, TIG LIFT, FLUX and MMA methods. It was designed for a wide range of applications – from service work to vehicle body repairs.

Intended for welding carbon steels, the machine works under active gas shielding or mixed gas, and also allows gas‑less welding (FLUX) using reversed polarity.

This model features the function of changing the MIG torch trigger mode: 2T (operation without lock) and 4T (trigger lock for long seams). The clear LED display ensures convenient operation even in intense lighting, and inductance adjustment enables precise tailoring of the arc characteristics.

✅ Key Features

• Welding methods: MIG/MAG, TIG LIFT, MMA, FLUX
• MIG torch trigger modes: 2T / 4T
• Welding of carbon steel with gas shielding or gas‑less
• Intuitive control panel with LED display
• Inductance adjustment

✅ Physical Parameters

• Fan‑cooling system – efficient operation
• Overload protection
• Device weight: 10 kg / kit: 12 kg
• Dimensions: 420 × 155 × 270 mm
• Package dimensions: 490 × 270 × 310 mm

✅ Power Supply Parameters

• Rated input voltage: 230 V; 50 Hz (single phase)
• Power: 6.6 kW
• Supply circuit breaker: C20A
• No‑load voltage: 50 V

✅ Technical Parameters

• Current at 100% duty cycle: 77 A (MIG/TIG), 62 A (MMA)
• Current at 60% duty cycle: 200 A (MIG/TIG), 160 A (MMA)
• Welding current range: 50–200 A (MIG/MAG), 10–200 A (TIG), 10–160 A (MMA)
• Self‑shielded wire diameter: 0.8–1.0 mm
• Steel wire diameter: 0.6–1.0 mm
• Electrode diameter: 1.6–4.0 mm
• Wire spool size: D200 (5 kg)
• Degree of protection: IP21S

✅ Equipment

• MIG torch 15 – length: 3 m
• Ground cable – length: 2 m
• Electrode cable – length: 2 m
• Wire feeder roll: 0.8–1.0 mm