Weldman MICRO MIG 200

WELDMAN MICRO MIG 200 - SEMI-AUTOMATIC MIG / MAG MMA FLUX 2in1 WELDING MACHINE

Brand: WELDMAN | Welding methods: MIG / MAG, MMA, FLUX | Power supply: 230V | Welding current: 200A | Efficiency: 60% / 170A

STANDARD EQUIPMENT

• Weldman MICRO MIG 200 device
• Welding holder MB15 3m
• 2 m ground cable with 300A ground clamp (DX25)
• 2.5 m cable with electrode holder 200A (DX25)
• 2 m power cord with plug
• Transport wheels
• Welding brush
• Welding mask
• MB15 gas nozzle
• Contact tips MB 0.8mm - 2 pcs.

Micro Mig 200 welder is one of the most efficient and solidly made products. These MICRO MIG 200 series devices are made based on the IGBT inverter technology.

As a result, the Micro Mig 200 semi-automatic welding machine has the best features of various transistors. The device uses general protections such as protection against over voltage, over current, overheating of the device, etc.

The Micro Mig 200 welder is designed for welding with the following methods: MIG / MAG, FLUX, MMA of carbon, stainless, alloy steel, cast iron and aluminum.

In addition, it has a wire feeder inside, which allows you to load a spool up to 5 kg.

Next to the wire feeder, there are sockets for changing the polarity of the handles, which must be changed when welding without gas shield (FLUX).

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with a high breakdown voltage and the switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment.

2 ROLL WIRE FEED

Professional feeder made of die-cast aluminum, has a powerful motor that allows for stable wire feeding without jamming. It is equipped with 2 drive rollers.

It is designed for heavy-duty work and for longer handles than plastic feeders, which cannot handle 4 or 5 meter handles.

COOLING

The device has a fan cooling system, which significantly increases its efficiency.

CHANGE IN POLARITY

Due to the variable polarity, it is possible to weld with the FLUX method with flux- cored wire without shielding gas. The wire is filled with a flux that produces protective gases during welding.

EASY TRANSPORT

The chassis for a gas cylinder and road wheels are a huge advantage of this device, it allows easy transport of the welder with all the accessories.

GENERAL PARAMETERS

• Supply voltage 230V / 50Hz
• 20 A power protection
• MIG MMA
• Supply current max 27 A 32 A
• Current of the supply, effective 20.9 A 24.7 A
• Idle voltage 56 V

WELDING PARAMETERS MMA 20A / 20.8V-200A / 28V

• Efficiency (at 40 ° C) 60% 100%
• Welding current 170 A 130 A
• Welding voltage 26.8 V 25.2 V

MIG / MAG WELDING PARAMETERS 40A / 16V-200A / 24V

• Efficiency (at 40 ° C) 60% 100%
• Welding current 170 A 130 A
• Welding voltage 22.5 V 20.5 V
• Max weight of the spool 5 kg
• Wire diameter: FLUX stainless steel
• 0.6-0.8 0.6-0.8 0.9
• Electrode diameter 1.6 / 2.0 / 3.2 / 4.0
• Fan cooling
• Insulation class F
• The degree of protection of the housing is IP21
• Dimensions 68x32x48 cm

WHAT ARE THE ADVANTAGES OF THE WELDMAN MICRO MIG 200 WELDING  MACHINE?

The setting of other parameters of the device is made using the control panel, on which are placed displays and control knobs. The above solution enables easy and quick setting and reading of all welding parameters.

Thanks to this, the Micro Mig 200 semi-automatic welding machine makes the work even more dynamic, which translates into the effectiveness of the activities performed.

What's more, thanks to its design, the Micro Mig 200 welder has a wide range of applications, so it will be perfect for the sheet metal industry, workshops, as well as for individual activities.

The welder is intended for semi-professional users.