Welder Fantasy 3in1 TRIO DUAL PULSE

Welder Fantasy 3in1 TRIO DUAL PULSE 230A MIG / MAG TIG MMA

| Brand: Welder Fantasy | Welding methods: MIG / MAG, MMA, TIG DC LIFT | Power supply: 230V | Welding current: 230A | Efficiency : 30% |

STANDARD EQUIPMENT:

• Welder Fantasy TRIO 230 DUAL PULSE welding source,
• Welding torch MIG / MAG PARKER MB15 3m,
• Welding torch TIG PARKER type SGT26FX 4m,
• Gas nozzle, sleeve, TIG torch connector,
• Cable with electrode holder 2m,
• 2m mass cable,
• Shielding gas hose with a quick connector 3m,
• 4 rolls in a 0.8-1.0 U feeder for aluminum,
• 4 additional rollers 1.0 - 1.2 U for aluminum,
• 2 additional rollers 0.6 - 0.8 V for steel,
• 2 additional rollers 1.0 - 1.2 V for steel,
• 2 smooth top pressure rollers for steel.
• Brush-hammer,
• Mask

The Welder Fantasy TRIO 230 DUAL PULSE device in a new, improved version is a modern inverter source that offers many possibilities when performing welding works.

Its main advantage is the possibility of welding with the use of single or double pulsation current in MIG or MAG mode and the possibility of using synergic settings.

Reliability and a wide range of applications of the devices make them satisfy even the most demanding users. Multifunctional, inverter welding semi-automatic

Welder Fantasy TRIO 230 DUAL PULSE, equipped with a new generation 4-roll professional wire feeder , is designed for manual arc welding of metals and metal alloys using the following methods:

• MIG / MAG with double pulse option,
• MIG / MAG with single pulse option,
• MIG / MAG,
• FCAW,
• SPOT - spot welding,
• TIG DC-lift,
• TIG DC-lift with pulse option,
• MMA

TECHNICAL DATA:

• Supply voltage [V]: 230V ± 10%
• Frequency [Hz]: 50
• Power factor cosφ: 0.73
• Capacity: 80
• Input current [A]: 40.6
• Welding current range [A]: MMA 15 - 230 TIG 15 - 230 MIG / MAG 30 - 230
• Idle voltage [V]: 84
• Output current [V]: MMA:  20.4 - 29.2 TIG:  10.4 - 19.2 MIG / MAG: 15.5 - 26.5
• Efficiency [%] (at an ambient temperature of 40 ° C): 30%
• Feeder type: new generation 4-roll (PROF)
• Welding wire diameter [mm]: 0.6 / 0.8 / 1.0
• Wire feed speed [m / min]: 2.7 - 14.4
• Insulation class: F.
• Housing protection class: IP23
• Weight [kg]: 23
• Dimensions, height / width / length [mm]:   450/210/405

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with a high breakdown voltage and the switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment.

LEVEL OF SECURITY

It determines the degree to which the device is resistant to the penetration of solid and water contaminants. IP23 means that the device is adapted to work in closed rooms and is not suitable for use in the rain.

MMA

A covered electrode method consisting of a metal core covered with a sheath. The welder feeds the electrode as it fuses to the workpiece so as to keep the arc of a constant length. The device allows welding with all types of electrodes, e.g. basic, cellulose, rutile or acid.

VRD

VRD (Voltage Reduction Device) function available in MMA mode. Increases safety and reduces the risk of electric shock.

ARC FORCE

Arc stabilization function by maintaining the voltage value of the welding arc regardless of its length and facilitating control of the amount of spatter.

HOT START

When the arc is struck, the welding current is temporarily increased in order to heat the material and the electrode at the point of contact and to properly shape the penetration and the weld face in the initial stage of welding.

MIG / MAG

Gas-shielded arc welding is one of the most widely used processes for the production of welded structures.

MIG PULSE

An advanced form of welding that uses the best of forms to transfer the molten electrode material to the workpiece. Unlike short circuits, pulse welding does not produce spatter or risk a cold "run-in".

Pulse welding positions are not limited as they are derivatives of globular or spray molds and their use is much more efficient. MIG PULSE is one of the best welding processes for a wide variety of metal applications and types.

DOUBLE FLASH PULSE

By welding with the MIG / MAG method with a double pulse, we obtain a high level of face appearance (scale effect). In addition, the use of automatic wire feeding affects the welding performance.

The MIG / MAG method with double pulse allows you to adjust the pulsation of the current (pulse balance) and to adjust the wire feed speed. Thanks to this, we improve the appearance of the weld.

TIG DC LIFT

Inert gas welding with a tungsten electrode. The use of this method enables the welding of all types of steel, i.e. carbon, alloy, stainless, acid-resistant steel, as well as copper alloys, e.g. bronze or brass.

GAS-FREE WELDING

Thanks to the polarity reversal function, it is possible to weld without shielding gas with FCAW self-shielding wire. It is a method with the use of a self-shielding flux-cored wire for welding (in all positions) steel of normal and increased strength, not exceeding 510 MPa.

REGULATION OF INDUCTION

It enables optimization of the arc characteristics depending on the thickness of the welded element as well as the welding method and conditions. This function is useful during MIG / MAG welding of thin elements, preventing them from burning out and brazing galvanized elements.

WORK CYCLE

The duty cycle is based on a 10-minute period. 60% duty cycle means that after 6 minutes of operation, a 4-minute break is required. Duty cycle of 100% means that the device can work continuously without interruption.

SPOT

Time welding function, used for tacking workpieces, thanks to which it is possible to obtain equal length of welds.

Braze welding

The device enables braze welding, mainly used in the automotive industry to join galvanized sheets together.

SAVE / LOAD

The device allows you to save and restore user programs. 10 individual user programs can be saved in the device memory.

GAS PREFLOW

Adjustment of gas flow time before arc ignition.

GAS POSTFLOW

Adjustment of gas flow time after the arc has expired.

2T / 4T

2T - Pressing the welding gun button will cause gas to pre-flow, then ignition the arc and start welding. When the button is released, the arc will be extinguished and gas will flow out.

4T - Pressing and releasing the welding gun button will pre-flow gas, then strike the arc and start welding. When the button is pressed and released again, the arc will be extinguished and the gas will flow out.

BURN BACK

Adjustment of the burn-back length of the wire end after the gas nozzle.

START CURRENT

TIG starting current.

SLOPE UP TIME

Time of rising of the starting current to the main welding current.

SLOPE DOWN TIME

The down-slope time from main welding current to final current (crater filling).

END CURRENT

End current.