SPARTUS WELDING MACHINE EasyMIG 130 Package

| Brand: Spartus | Welding methods: FLUX | Power supply: 230V | Welding current: 130A | Efficiency: 30% |

STANDARD EQUIPMENT

• Sherman Easymig 130 welding machine
• MIG150 welding gun
• Ground cable
• Welding shield
• Hammer with brush
• Shoulder strap
• User manual

SPARTUS® EasyMIG 130 is a small welding machine based on IGBT transistors. It is intended for cored wire welding (FCAW). It is the perfect solution for anyone looking for a convenient welding solution at home or in a small workshop.

SPARTUS® EasyMIG 130 is an easy-to-use welding machine, perfect for household tasks, repairs or hobby projects. This is an ideal solution for those who are looking for a practical tool without unnecessary complications. Thanks to EasyMIG 130, you can implement a wide range of projects while enjoying low operating costs.

ADVANTAGES OF THE DEVICE:

• Customized Performance: With a maximum welding current of 130A, EasyMIG 130 provides enough power for most home projects and workshop applications.
• Powered from a socket: The device operates on a single-phase 230V network, which means you can use it anywhere where there is access to standard power supply.< /li>
• Simple Wire Feeder: Two-roll 1kg/100mm spool feeder for easy operation and smooth wire feeding.
• MIG150 Welding Gun: Fixed MIG150 gun makes the machine always ready for use, making it easy to start welding quickly,
• Welding Modes: Two welding modes are available - synergic, which automatically adjusts welding parameters, and manual, which allows settings to be tailored to specific project requirements, increasing device flexibility.
• 2T/4T function: Provides comfort during extended work, minimizing hand fatigue.
• Self-shielded wire welding: The ability to weld without the need to use protective gas is a big plus for users who want to reduce additional costs. Additionally, eliminating the need to use external gas cylinders significantly increases the mobility of the device, making it easier to work in hard-to-reach locations or outdoors.

TECHNICAL DATA:

• Supply voltage: ~1× 230V ± 10% 50 / 60 Hz
• MIG welding current: 10 - 130A
• MIG duty cycle: 30%
• Output voltage: 20.5V
• Feeder type: built-in, 2-roll
• Wire spool: ≤ 1kg / Ø100mm
• Wire diameter: 0.8mm
• Synergy: yes
• 2T/4T operation mode: yes
• Additional MIG functions: manual parameter correction
• Current consumption: 23A
• Power factor (cosφ): 0.65
• Efficiency η: 78%
• Insulation class: H
• Protection rating: IP21S
• Weight: 5kg
• Dimensions: 350x140x220mm

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field-effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment.

OVERHEAT PROTECTION

SourceThe power source is equipped with a thermal, automatic overload switch. When the temperature of the welding machine is too high, the protection will disconnect the welding current and the diode will light up to indicate overheating. Once the temperature drops, the switch will automatically reset.

PROTECTION DEGREE

IP determines the extent to which the device is resistant to the penetration of solid and water contaminants. IP21S means that the device is suitable for operation in closed rooms.

2 ROLLER WIRE FEEDER

A small and simple feeder that allows for stable wire feeding. It has adjustable pressure force.

SYNERGY

MIG/MAG welding using synergic settings. The device selects welding parameters depending on the selected type and thickness of the material.

EASY TO USE, CLEAR CONTROL PANEL

The easy-to-use control panel allows precise and smooth parameter adjustment. The digital display indicates the actual current during welding.

2T/4T

2T - Pressing the welding torch button will pre-flow the gas, then ignite the arc and start welding. After releasing the button, the arc will extinguish and the gas will flow.

4T - Pressing and releasing the welding torch button will pre-flow the gas, then ignite the arc and start welding. After pressing and releasing the button again, the arc will extinguish and the gas will flow.

STRONG AND SOLID CONSTRUCTION

The device casing is made of light and durable composites, resistant to all types of mechanical damage.

CHANGE OF POLARITY - WELDING WITHOUT GAS

Thanks to variable polarity, it is possible to weld with the FLUX method with flux-cored wire without shielding gas. The wire is filled with flux that produces protective gases during welding.

DUTY CYCLE

The duty cycle is based on a 10-minute period. A 30% duty cycle means that after 3 minutes of operation, a 7-minute break is required. A duty cycle of 100% means that the device can work continuously, without interruption.

CONTINUOUS ADJUSTMENT OF WIRE FEED

Smooth adjustment of the wire feed speed is supported by an additional potentiometer allowing you to set the speed for different wire diameters.

EASY TRANSPORT

Small dimensions and lightweight design make the devices easy to take to any workplace. The device is equipped with a strong shoulder strap that makes it easy to carry.

COOLING

The device has a fan cooling system, which significantly increases its efficiency.