Spartus EasyMIG 215

SPARTUS EASY MIG 215

| Brand: SPARTUS | Welding methods: MIG, MMA, TIG LIFT | Power supply: AC 230V / 50Hz | Welding current: 200A | Efficiency: 60% |

STANDARD EQUIPMENT:

• Welder SPARTUS® EasyMIG 215
• SPARTUS® MIG SPE 150 torch 3m
• Electrode holder
• Mass cable
• Gas hose

SPARTUS® EasyMIG 215 is a modern, inverter semi-automatic welding machine, constructed on the basis of IGBT transistors. It has a welding function:

• MIG / MAG shielded by inert and active gases,
• Covered electrode MMA ,
• TIG Lift with frictional arc ignition.
• FLUX  easy polarity change allows welding with self-shielding wire without gas.

The maximum welding current for MIG / MAG / TIG methods is 200A and 180A for the MMA method . The device is powered by a single-phase 230V network.

SPARTUS® EasyMIG 215 is equipped with a synergistic system for MIG / MAG welding with steel wires with a diameter of 0.6 / 0.8 / 1.0 mm and aluminum 1.0 mm, with the possibility of manual parameter correction.

A modern LCD display allows you to easily and quickly set the welding voltage and manage the functions of the device.

When adjusting the parameters, the display suggests the shape of the weld and graphically shows the recommended material thickness for the selected current.

Stable output parameters guarantee high-quality welds.

Examples of applications: light industry, renovation works in the field, workshop works, automotive, silencer welding.

TECHNICAL SPECIFICATIONS

• Supply voltage: ~ 1 × 230V ± 10% 50/60 Hz
• MIG welding current: 50 - 200A
• MIG duty cycle: 60%
• Working output voltage: 16.5 - 24V
• Wire feed speed: 2 - 12.5m / min
• Wire spool: ≤ 5kg / ∅200mm
• Wire diameter: 0.6, 0.8, 1.0mm
• Additional functions: MIG inductance regulation, spool gun, wire test, polarity change
• Welding current: TIG 10 - 200A
• MMA welding current: 10 - 180A
• MIG current consumption: 32A / TIG 26A / MMA 33A
• Power factor: (cosφ) 0.76
• Efficiency: η85%
• Insulation class: H.
• Protection degree: IP21S
• Weight: 12kg
• Dimensions: 490 x 230 x 330mm

LEVEL OF SECURITY

IP defines the degree to which the device is resistant to the ingress of solid and water contaminants. IP21 means that the device is adapted to work in closed rooms.

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with a high breakdown voltage and the switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment.

PROTECTION AGAINST OVERHEATING

The IGBT module is protected against overheating by a protective system that switches off the machine's welding circuit. After a few minutes, the welding machine cools down to a temperature that allows it to be switched on again automatically.

WORK CYCLE

The duty cycle is based on a 10-minute period. 60% duty cycle means that after 6 minutes of operation, a 4-minute break is required. Duty cycle of 100% means that the device can work continuously without interruption.

MMA

A covered electrode method consisting of a metal core covered with a sheath. The device allows welding with all types of electrodes, e.g. basic, cellulose, rutile or acid.

ARC FORCE

Increasing or decreasing the length of the welding arc depending on the distance between the electrode and the material to be welded. It allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in the welding current, which stabilizes the arc.

VRD

The VRD function lowers the voltage in no-load condition. The correct voltage is not restored until just before the arc is struck. This minimizes the risk of electric shock, but in some cases may make the arc difficult to ignite.

HOT START

The purpose of this function is to prevent the electrode from sticking to the material and is a great help when striking the arc. It works when the arc is struck, causing the welding current to temporarily increase above the value set by the welder.

SYNERGY

Welding with the MIG / MAG method using synergic settings. The device selects welding parameters depending on the selected type and thickness of the material. These parameters can be changed by the user in order to adjust the settings to their own needs. Many programs have been prepared for synergic welding, including the braze welding program.

2 ROLL WIRE FEED

A professional feeder made of die-cast aluminum, has a powerful motor that allows for stable wire feeding without jamming. It is equipped with 2 drive rollers.

SMOOTH ADJUSTMENT OF WIRE FEED

Smooth regulation of the wire feed speed is supported by an additional potentiometer, enabling the speed setting for different wire diameters.

EUROCONNECTOR

Standard connection for welding torches, which enables the connection of various types of torches (e.g. prepared for aluminum welding by replacing the Teflon insert and contact tip).

REGULATION OF INDUCTION

It enables optimization of the arc characteristics depending on the thickness of the welded element as well as the welding method and conditions. The function is useful during MIG / MAG welding of thin elements, preventing them from burning out and brazing of galvanized elements.

2T / 4T

2T - Pressing the gun trigger button will cause gas to pre-flow, then strike the arc and start welding. When the button is released, the arc will be extinguished and gas will flow out.

4T - Pressing and releasing the welding gun button will cause gas to pre-flow, then strike the arc and start welding. When the button is pressed and released again, the arc will extinguish and gas will flow out.

REVERSING POLARITY - WELDING WITHOUT GAS

Due to the variable polarity, it is possible to weld with the FLUX method with flux-cored wire without shielding gas. The wire is filled with a flux that produces protective gases during welding.

EASY TO USE, READABLE CONTROL PANEL

The easy-to-use control panel enables precise and smooth adjustment of parameters. The digital display shows the actual current during welding. The semi-automatic welding machine has a menu that facilitates operation and allows you to choose the type of material to be welded.

WELDING OF ALUMINUM ALLOYS

Welding aluminum is not a simple activity, it requires experience, knowledge and certain practices from the welder, which will facilitate the execution of welds on aluminum elements.

Depending on the needs, appropriate voltage and inductance corrections should be made to obtain the desired effect.

WIRE TEST

Pressing the wire feed button will start the wire feed motor without starting the flow of shielding gas. The power source also starts, but does not supply welding current.

COOLING

The device has a fan cooling system, which significantly increases its efficiency.

TIG LIFT WELDING

The SPARTUS® EasyMIG 215 device enables TIG welding (in argon shield), after connecting an additional TIG welding torch with a gas valve in the handle to an inverter welding machine.

The arc is ignited by rubbing the electrode with the material being welded.

WELDING WITH A SPOOL GUN

The welder allows welding with a handle with an integrated wire feeder. The spool of welding wire D100 is placed in the handle of the handle.

The use of the Spoolgun holder allows welding with two different wires without having to change the welding machine.

The Spoolgun Mount is an additional option that can be purchased at our other auctions.