Sherman Welding machine DIGIMIG 200 HIT

SHERMAN DIGIMIG 200 HIT

| Brand: SHERMAN | Welding methods: MIG, MMA, TIG LIFT | Power supply: 230V | Welding current: 200A | Efficiency: 45%

STANDARD EQUIPMENT

• Sherman DIGIMIG 200 HIT welding machine
• Welding torch TW-15/3m
• electrode wire
• Ground cable

The DIGIMIG 200 HIT synergic welding machine is used for manual welding of steel and non-ferrous metals. It enables welding with MMA (covered electrode), TIG Lift and MIG/MAG methods.

By changing the polarity, the device allows you to weld using the MIG / MAG method using both standard wires in a protective gas shield and self-shielding flux-cored wires.

The device allows you to connect a Spool Gun type holder with a mini wire feeder and a D100 spool of steel or colored wire.

The MIG/MAG method can be used in manual and synergic modes. Synergy programs are available for steel, Al alloys. and for welding with self-shielding wire.

The device is made in the IGBT technology, which allows for a significant reduction in the weight and dimensions of the welder and an increase in efficiency while reducing energy consumption.

The welder is used in closed or roofed rooms, not exposed to direct weather conditions.

TECHNICAL DATA:

• Catalog number: 7812719
• Welding/cutting/other methods: brazing, MIG/MAG, MMA DC, TIG Lift (by rubbing) DC
• Supply voltage [V]: AC 230
• Manufacturing technology: IGBT
• Max MMA welding current [A]: 180
• Max TIG DC welding current [A]: 200
• Max MIG/MAG welding current [A]: 200
• MMA duty cycle [%]: 60
• TIG duty cycle [%]: 60
• MIG/MAG duty cycle [%]: 45
• No-load voltage [V]: 65
• Wire feed speed [m/min]: 2.5-15
• MIG welding voltage [V]: 15.5 - 24
• Burnback time [s]: 0-10
• MIG spot welding time [s]: 0-3
• Max power consumption MMA [kVA}: 4.9
• Max TIG power consumption [kVA]: 3.6
• Max power consumption MIG/MAG [kVA]: 4.8
• Max current consumption MMA [A]: 35
• Max TIG power consumption [A]: 25
• Max current consumption MIG/MAG [A]: 33
• Wed. spool with wire ø [mm]: 100, 200
• Roll dimensions [mm]: 30x10x10
• Main method: MIG/MAG
• Network Protection [A]: 25
• Weight [kg]: 14.38
• Dimensions (L x W x H) [cm]: 44 x 21 x 37

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment.

LEVEL OF SECURITY

IP defines the degree to which the device is resistant to the ingress of solid and water contaminants. IP21 means that the device is adapted to work in closed rooms.

OVERHEAT PROTECTION

The IGBT module is protected against overheating by a protective installation that disables the welding circuit of the device. After a few minutes, the welder cools down to a temperature that allows it to restart automatically.

WORK CYCLE

The duty cycle is based on a 10-minute period. A 45% duty cycle means that after 4.5 minutes of operation, a 5.5-minute break is required. 100% duty cycle means that the device can work continuously without interruption.

MMA

A method that uses a coated electrode, consisting of a metal core covered with a sheath. The device allows welding with all types of electrodes.

ARC FORCE

Increasing or decreasing the length of the welding arc depending on the distance between the electrode and the material being welded. Allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in the welding current, which stabilizes the arc.

HOT START

The function is designed to prevent the electrode from sticking to the material and is a great help when striking the arc. It works when the arc is struck, causing a temporary increase in the welding current above the value set by the welder.

VRD

The VRD function lowers the no-load voltage. The correct voltage value is only restored just before the arc is struck. This minimizes the risk of electric shock, but in some cases it may make it difficult to strike the arc.

CHANGE OF POLARITY - WELDING WITHOUT GAS

Thanks to the variable polarity, it is possible to weld using the FLUX method with flux-cored wire without shielding gas. The wire is filled with a flux that produces protective gases during welding.

SYNERGY

MIG/MAG welding with synergic settings. The device selects the welding parameters depending on the selected type and thickness of the material.

These parameters can be changed by the user in order to adjust the settings to their own needs. Many programs have been prepared for synergic welding.

2 ROLL WIRE FEEDER

Professional feeder made of aluminum pressure castings, has a powerful motor that allows for stable wire feeding without jamming. It is equipped with 2 drive rollers.

2T/4T

2T - Pressing the welding torch button will pre-flow the gas, then ignite the arc and start welding. When the button is released, the arc will extinguish and the gas will flow.

4T - Pressing and releasing the welding torch button will pre-flow the gas, then ignite the arc and start welding. When the button is pressed and released again, the arc will be extinguished and the gas will flow.

INDUCTION ADJUSTMENT

It enables optimization of the arc characteristics depending on the thickness of the welded element as well as the welding method and conditions. The function is useful during MIG/MAG welding of thin elements, preventing their burn-through and braze welding of galvanized elements.

EASY TO USE, CLEAR CONTROL PANEL

The easy-to-use control panel enables precise and smooth adjustment of parameters. The digital LCD display shows the actual welding current. The semi-automatic welding machine has a menu that facilitates operation and allows you to choose the type of material to be welded.

BRAZING

After selecting the type of CuSi wire, the device enables brazing, mainly used in the automotive industry to connect galvanized sheets together.

EUROCONNECTOR

Standard welding torch connection that allows you to connect various types of torches (e.g. prepared for aluminum welding by replacing the Teflon insert and contact tip).

WELDING WITH A SPOOL GUN

The SPOOL GUN welding gun with a built-in wire feeder is used for MIG/MAG welding. It is mainly used in car workshops and for welding thin sheets.

The spool with the D100 welding wire is placed in the handle of the holder. The handle has a standard EURO type connector and a control plug. The Spoolgun holder is an additional option that can be purchased at our other auctions.

SPOT SPOT WELDING

Timed welding function, used for tacking workpieces to achieve even length weld seams.

STRONG AND SOLID CONSTRUCTION

The housing of the device is made of light and durable composites, resistant to all kinds of mechanical damage.

EASY TRANSPORT

Equipping the welding machine with a transport handle ensuring comfort when changing workplaces.