SHERMAN MIG 180 Easywork WELDING MACHINE

| Brand: SHERMAN | Welding methods: MIG/MAG, MMA, FLUX| Power supply: 230V | Welding current: 180A | Efficiency: 60% |

STANDARD EQUIPMENT

• Sherman MIG 180 Easywork Welder
• TW-14/2.5m Welding Torch
• Electrode Cable
• Ground Cable

The MIG 180 Easywork semi-automatic welder by Sherman is used for manual welding of steel and non-ferrous metals.

It allows welding using the following methods:

• MIG/MAG - gas-shielded welding wire
• MMA (covered electrode) - direct current (DC) covered electrode
• FLUX - gas-free welding wire shielding

Thanks to the change in polarity, the device allows welding using both standard wires in a shielding gas shield and self-shielding flux-cored wires.

The welding machine is made in IGBT inverter technology, which allowed for a significant reduction in its weight and dimensions.

The device can be used in closed or roofed rooms, not exposed to direct atmospheric conditions. It is intended mainly for amateur work and light occasional workshop work.

TECHNICAL DATA:

• Catalog number: 7812937
• EAN code: 5903686610981
• Welding/cutting methods/other: MIG/MAG, MMA DC, TIG Lift (by friction) DC
• Power supply voltage [V]: AC 230
• Manufacturing technology: IGBT
• Max welding current MMA [A]: 160
• Max welding current TIG DC [A]: 160
• Max welding current MIG/MAG [A]: 180
• MMA duty cycle [%]: 60
• TIG duty cycle [%]: 60
• MIG/MAG duty cycle [%]: 60
• No-load voltage [V]: 59
• MIG welding voltage [V]: 15 – 24
• Max MMA power consumption [kVA}: 5.8
• Max TIG power consumption [kVA]: 3.6
• Max MIG/MAG power consumption [kVA]: 6
• Max MMA current consumption [A]: 23
• Max TIG current consumption [A]: 6
• Max MIG/MAG current consumption [A]: 21
• Wed. spool with wire ø [mm]: 100
• Number of rolls in feeder: 2
• Roller dimensions [mm]: 28×8 (7×7)
• Main method: MIG/MAG
• Functions: Welding without gas, Digital control, Synergy carbon steel, VRD, LED display, Synergy wire self-shielding
• Network protection [A]: 16
• Warranty period for companies [years]: 1
• Weight [kg]: 8.1
• Dimensions (L x W x H) [cm]: 32.5 x 15.5 x 28

IGBT TECHNOLOGY

Modern technologyia based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding devices.

PROTECTION RATING

IP determines the degree to which the device is resistant to the ingress of solid and water contaminants. IP21 means that the device is suitable for use in closed rooms.

OVERHEATING PROTECTION

The power source is equipped with a thermal, automatic overload switch. When the temperature of the welding machine is too high, the protection will disconnect the welding current and the diode will light up to indicate overheating. After the temperature drops, the switch will automatically reset.

Do not disconnect the power supply at this time, as the continuously operating fan cools the internal radiators of the device in order to reduce the temperature faster. After restarting, remember to limit the welding parameters in order to continue continuous operation of the device.

MMA

A method that uses a coated electrode, consisting of a metal core covered with a coating. The device allows welding with all types of electrodes.

VRD

Reduces the voltage in a no-load state. The correct voltage value is restored only just before the arc is struck. This minimizes the risk of electric shock, but in some cases it may make it difficult to strike the arc.

DUTY CYCLE

The duty cycle is based on a 10-minute period. A duty cycle of 60% means that after 6 minutes of operation, a 4-minute break is required. A 100% duty cycle means that the device can operate continuously, without interruption.

POLARITY CHANGE - GAS-FREE WELDING

Thanks to the variable polarity, it is possible to weld using the FLUX method with flux-cored wire without shielding gas. The wire is filled with a flux that produces protective gases during welding.

EASY TO USE, CLEAR CONTROL PANEL

The easy to use control panel allows precise and smooth adjustment of parameters. The digital LCD display shows the actual current during welding. The semi-automatic welding machine has a menu that makes it easy to use and allows you to select the type of material being welded.

SYNERGY

MIG/MAG welding using synergistic settings. The device selects welding parameters depending on the selected type and thickness of material.

These parameters can be changed by the user to adjust the settings to their own needs. Many programs have been prepared for synergistic welding.

STRONG AND SOLID CONSTRUCTION

The device housing is made oflight anddurable composites, resistant to all types of mechanical damage.

EASY TRANSPORT

The welder is equipped witha transport handle that ensures comfort when changing workplaces.

COOLING

The device has a fan cooling system which significantly increases its efficiency.