Sherman TIG LIFT Torch X35 T-26V Flex 4m 10-25mm

SHERMAN WELDING TORCH X35 - T-26V FLEX 4m

X35 series welding torches are designed for manual TIG welding in shielding gases with arc ignition by rubbing or HF after soldering the appropriate plug.

They can be used in a wide range of welding works. The torches are equipped with a valve to control the gas flow and a flexible head, useful when welding elements with difficult access.

TECHNICAL DATA:

• Length [m]: 4
• Current carrying capacity in the duty cycle X 35(A) - AC: 160
• Current carrying capacity in the duty cycle X 35(A) - DC: 200
• Shielding gas flow rate [l/min]: 10 - 20
• Type of cooling: shielding gas
• Connection in the handle: 10-25mm

Our TIG welding torch is sold without a control plug. This is due to the variety of control sockets used in different welding machine models available on the market. To properly connect the torch to your welding machine, please follow these steps:

1. Identify the PINs on your welding machine - Check which PINs in your welding machine's socket correspond to the control of the welding torch. This information can be found in the welding machine's user manual or by contacting the manufacturer of the device.

2. Obtain the appropriate plug - Purchase the appropriate plug that fits your welding machine's socket. Ensure that the plug complies with the standards and specifications of your device.

3. Solder the wires - Our torch has two wires: positive (+) and negative (-). Solder both wires to the corresponding PINs in the plug, according to the information identified earlier.