Inverter MIG welding machine MP-0106 Flux - Welding Kit #1

Availability: Temporarily unavailable
Price: €137.25 137.25
quantity pcs.

product unavailable

add to wish list

Description

MAJSTER POLSKA MIG MP-0106 FLUX

Brand: MAJSTER POLSKA | Welding methods: MIG (FLUX)  | Power supply: AC 230V/50Hz | Welding current: 200A | Efficiency: 25% 

STANDARD ACCESSORIES:

  • MP-0106 welder
  • Manual Mask
  • Hammer Brush
  • Ground cable
  • Electrode Lead
  • Integrated MIG gun
  • 2x Self-shielding wire 0,45kg 0.8mm
  • Original packaging

Pautomatic welding machine intended for manual, electric welding of steel with a self-shielding wire (FCAW Flux-Cored Arc Welding method), MMA, as well as the TIG Lift method.

The FCAW method is flux cored arc welding.

This is a welding method similar to MIG/MAG, except that the wire is filled with flux or a chemical substance that produces during welding protective gases.

FCAW welding combines the advantages of both MMA and MAG welding: very high efficiency  ( no need to change the electrode often) you can also weld outdoors  (the flux additionally protects against oxidation of the weld) the welder does not need to have very high qualifications.

It is intended for all kinds of welding works, in locksmith workshops, repair workshops, tinsmith workshops, farm, etc.

The power source was built on  IGBT transistors providing minimum electromagnetic interference, low power losses in basic systems, enabling increasing efficiency and reliability  power sources, less consumption.

 TECHNICAL SPECIFICATIONS:

  • Model: MP-0106
  • Power supply voltage:230V
  • Frequency: 50Hz
  • Rated input capacity: 3.7KVA
  • Welding methods: FLUX - semi-automatic welding with self-shielding wire "without gas"
  • Electrode Range: 1.6-4mm
  • Wire diameter: 0.6-0.8mm
  • Wire spool weight: max 1kg
  • Rated Welding Cycle: 25%
  • Ingress protection: IP21S
  • MIG welding current:40-200A
  • MMA welding current:20-200A
  • Protection level: H
  • Weight: 5.6kg

IGBT TECHNOLOGY

The basis of the welder's electricity conversion system are electronic systems made in IGBT technology, enabling operation in the frequency range above 200kHz.

PROTECTION LEVEL

IP defines the degree to which the device is resistant to the penetration of solid and water pollutants inside. IP21S means that the device is adapted to work in closed rooms.

WORK CYCLE

The duty cycle is based on a 10-minute period. Cycle pracy 25% means that after2.5 minutes a 7.5-minute break is required. 100% duty cycle means that the device can work continuously without interruptions.

2 ROLL WIRE FEEDER

Small and simple feeder, which allows for stable wire feeding. It has adjustable clamping force.

CONTINUOUS WIRE FEED ADJUSTMENT

Smooth adjustment of the wire feed speed is supported by an additional potentiometer that allows you to set the speed for different wire diameters.

OVERHEAT PROTECTION

The power source is equipped with a thermal, automatic switch overload. When the temperature of the welder is too high, the protection will disconnect the welding current and the diode will light up indicating overheating. After the temperature drops, the circuit breaker will automatically reset.

Do not disconnect the power during this time, as the continuously operating fan cools the device's internal heat sinks to lower the temperature faster.

After restart, remember to limit welding parameters for continued operation of the device.

STRONG AND SOLID CONSTRUCTION

The housing of the device is made of light and durable composites, resistant to all kinds of mechanical damage.

WELDING WITHOUT GAS

Can be welded using the FLUX method with flux-cored wire without shielding gas. The wire is filled with a flux that produces protective gases during welding.

self-shielding cored wire is intended for welding ordinary and high-strength carbon steels not exceeding 510 MPa. Gasless welding wire.

It is used in prefabrication, construction, production of tanks, agricultural equipment, etc. It is used both in the production and repair of devices.

HOT START FUNCTION

The function is popularly known as hot start. It works when the arc is struck, causing a temporary increase in the welding current above the value set by the welder. HOT START is designed to prevent the electrode from sticking to the material and is a great help when striking the arc. In the case of welding small elements, it is recommended to disable this function, as it may cause burnout of the welded material.

ARC FORCE

It allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in the welding current, which stabilizes the arc. Decreasing the value gives a soft arc and less depth of penetration.

VRD FUNCTION

Module reducing the quiescent voltage (idling) of the secondary circuit of the device). Increases safety and reduces the risk of electric shock. The function turns off and on the welding power supply when the resistance between the electrode tips and the welded element is measured during welding.

EASY TRANSPORT

Small dimensions and lightweight design make the devices easy to take to any workplace. The device is equipped with a strong shoulder strap that makes it easy to carry.

COOLING

The device has a cooling system fan which significantly increases its efficiency.

Menu Search Categories More Sidebar
up
Shop is in view mode
View full version of the site
Sklep internetowy Shoper.pl