Induction heater Weldman INDUCT 210

WELDMAN INDUCT 210 INDUCTION HEATER

| Brand: Weldman | Output current: 85A | Efficiency: 15% | Supply voltage: 230V |

STANDARD ACCESSORIES

• Induction heater INDUCT 210
• Multi-tool 1.5m (INDUCT 210) / 2.4m (INDUCT 310)
• Power cord 1.8m
• Vertical induction coil                                                                      
• Horizontal induction coil                                                                          
• Vertical induction coil                                                                          
• Horizontal induction coil                                                                                     
• Flat inductor 55mm diameter (3mm diameter)
• Flexible induction coil 92 cm long (3 mm cross section)
• Induction coil for dent repair (sheet metal heating)

Induction heater is a device that generates high-frequency alternating current, which, passing through the induction coil, creates an alternating magnetic field, which, using the principle of electromagnetic induction, introduces into the vibration of electrons inside the heated material.

The energy of the electrons is lost as heat, which heats up the metal within range of the coil: the more the material is magnetized. An important element in induction heating is the lack of direct contact during the transfer of magnetic field energy and placing the heated object in the center of this field. Induction heating offers a heat source that can be well regulated and confined to partial heating zones.

The INDUCT induction heater is designed for quick heating of metal elements, perfectly replacing traditional methods of heating with combustible gases. By limiting the heating zone, it eliminates the risk of damage to the element (painted surface, wiring harness, upholstery, rubber cable) and improves work safety.

Irreplaceable in the automotive industry   in workshop and repair works (heating corroded bolts and nuts, hubs, bushings, bearings, exhaust system components, sheet metal flat, protective strips on the car body, etc.) and in the heating and sanitary industry.

TECHNICAL SPECIFICATIONS:

• Power supply voltage: 230V/50Hz
• Supply current power: 2kVA
• Supply current max: 7A
• Output voltage: 16V
• Output current: 85A
• Induction frequency: 100 kHz
• Efficiency: 15%@85A
• Ambient temperature:-10°C to +40°C
• Security:IP21
• Required protection: 16A
• Heater dimensions (W x L x H): 17 x 30 x 21 cm
• Fuser weight: 5.2 kg
• Weight of heater with accessories: 6.7 kg

PROTECTION LEVEL

IP determines the degree to which the device is resistant to solid and water contamination. IP21means that the device is adapted to work in closed rooms.

WORK CYCLE

Duty cycle is based on a 10-minute period. Duty cycle 15% means that after 1.5 minutes of operation the device requires 8.5 minute break 100% duty cycle means the device can run continuously without interruption.

WORKING ENVIRONMENT

The device should be placed in a well-ventilated room, with free air circulation, away from flammable objects, min. distance from other objects 0.5 m.

STRONG AND SOLID CONSTRUCTION

The housing of the device is made of light and durablecomposites, resistant to all kinds of mechanical damage.

EASY TRANSPORT

The low weight of the heater ensures convenience when changing workplaces.